If a phone doesn’t power up when powered on, it can be due to low battery capacity, damage powering point, bad powering IC or Panel. any of these are the possible reasons why a phone might not power on.
Here are the possible Non-technical DIY solution to a Not powering phone
1- First check if the phone charges by plugging it to a charger socket, leave it on the socket for at least 10 to 20 minutes , if the cause of the problem is due to flat battery, the phone should get some charges during this minutes and should be able to power on now,
similarly, if the phone’s battery is removable you can remove it and check a different charged battery, the phone should power on with the new battery if the problem is as a result of dead or flat battery
2 – A bad powering point equally results to phone not powering, this cause is very easy to figure out , to find out if the cause of your phone powering problem is from the power button, plug your phone on the charger sockect and check if it charges, if it does then the inner power button is the problem and needs to be changed, this is where you will need the service of an experience phone repair engineer, you can click here to request for our phone repair service, because at Chrisrepair.com we offer swift and hassle free phone repair services.
3 – Another possible cause of a phone not powering is the a faulty powering IC or faulty panel, this can be as a result of water damage, heavy fall on the ground etc, if you have applied the DIY solutions on the 1 and 2 above without any luck then one of these is the problem, in this case you will need the service of an experience phone repair engineer, you can click here to request for our phone repair service, because at Chrisrepair.com we offer swift and hassle free phone repair services.
Thats the possible DIY solutions to a dead(Not powering) phone